JellyBOX 2 "Easy-Build" DIY Kit - NEW!

As low as $990.00

In stock




  • DIY novices
  • 3D printing novices
  • parents with kids
  • teachers
  • chronically busy folks

  • in-class programs
  • after-school programs
  • libraries
  • summer camps
  • team building
Customize JellyBOX 2 "Easy-Build" DIY Kit - NEW!

* Required Fields

Your Customization
JellyBOX 2 "Easy-Build" DIY Kit - NEW!
JellyBOX 2 "Easy-Build" DIY Kit - NEW!

In stock



    Easy Build kit arrives with parts of the JellyBOX pre-assembled to both speeds up the build and makes sure you everyone succeeds. We carefully chose what parts to pre-assemble so that the hands-on learning doesn’t suffer. You still get the one-of-a-kind intro to 3D printing: just faster and easier.

    Easy Build kit is also used in our “2-Days Professional Development class”, where you can build the whole JellyBOX and learn to print led by our experienced instructors.


    Dual filament fans were an option in the JellyBOX 1, now they are included with the JellyBOX 2.

    Dual filament fans are awesome for PLA and any filament that likes to be cool. You get exactly twice as much cooling power, which is great for general surface
    quality, bridges, fast printing, and printing with big nozzles.

    Also great for printing complex models in which parts may be shielded from the cool air if only one fan is in place.


    The JellyBOX 2 features a specially constructed clear acrylic door with a double hinge.

    This allows printing with the door open for easy access; closed for safety from little hands & to help insulate big prints on a heated bed.

    Opened or closed… always retaining the acrylic see-through goodness of the JellyBOX.


    Recommended for intermediate/advanced print masters or anyone who likes to experiment (if you are reading this, you are probably one or both of the above!).

    JellyBOX 2 heated bed has new construction that makes this upgrade easier.

    The heated bed option contains a build plate is coated with the PEI surface, the best option for the PETG and Flexible filament prints.

    The power supply for the heated bed is bigger (12V/10A).

    Save money by ordering a heated bed with your JellyBOX 2 purchase. It is more cost-effective than buying it later as an upgrade!

    The heated bed allows you to heat up the build platform to up to 80°C.

    It's great to reduce warping issues with any filament or when printing in very cold rooms. 80°C is enough to comfortably print PETG (you can print PETG without the
    heated bed, but it's a bit more difficult) and all commonly available 'special' blends. It also helps with PLA, but is not crucial.



    Pre-assembled parts:

    • X-Assembly 
    • Extruder
    • Hotend with E3D Lite 6 and 20mm melt-zone (volcano)
    • Cold or heated bed
    • X-Harness
    • Arduino-RAMPS-Stepper drivers with pre-loaded JellyBOX version of MARLIN

    Other Parts

    • All Jellybox

      lasercut acrylic parts
    • All wires (pre-crimped to size)


    • Power supply
    • USB cable
    • SD card
    • Online manual (full video + additional text)
    • Precision Cutters
    • Small Vice Grip
    • Flat screwdriver 3mm
    • Metric 1.5 2 2.5 hex keys with ball end
    • Torx key T10
    • Metric Imade3D custom wrench for M2, M3, M14 extruder nozzle and hex spacers M3
    • Grease and nut lock liquid
    • Roll of PLA filament (220g)
    • Blue tape replacement for the cold bed
    More Information
    Apply Add To Quote No
    Write Your Own Review
    You're reviewing:JellyBOX 2 "Easy-Build" DIY Kit - NEW!
    © 2017 IMADE3D Shop. All Rights Reserved.